Meeting Air source heat pump High efficient saving energy Machine
water heater
Free Standing Intelligent Controller Air To Water Heat Pump With
Stainless Steel Shell
Technology Specification , Air source heat pump
1.DESCRIPTION
Heat pump collect heat from air by 20℃ below the refrigerant and
Compress heat into high temperature and
high pressure refrigerant, and then passed through the heat
transfer to the need to be heated water or other
media,electricity is the transport of porters.so that the heat pump
Efficiency(COP)reaches 400-
500%.Compare with 90% of heat from electricity,60% of the heat from
natural gas and fuel,35% of heat from
coal,heat pump are even more energy efficient than solar energy.
QC:
1. Complying with ISO standard. Quality Ensured.
2. Complete Inspection for each unit before out of factory,
covering water system and electricity detection and testing,
ensuring 100% right product before shipment.
3. Strict quality control during production. We have liquid soap
detection, halogen detection, electrical detection and
water-soaking detection during production to avoid gas leakage and
electrical problems.
4. Full inspection on bigger parts such as compressors, condensers,
evaporators, expansion valves, flow switches, controllers etc.
Selection inspection for small parts such as sensors, pressure
switches etc.
5. Well noise control by using mute cotton for casing plates and
soft rubber feet for floating compressors, some of the models use
compressor isolation shields.
6. Well insulated with insulated cotton for every pipe and parts,
include compressor, dryer filter and each pipes.
7. We have passed TUV and SGS inspections. We have CE, Ro HS, IEC,
CCC, CB certificates for most of our products. Some of our products
have en14511 test, en14825 test.
A. Payment service
1. T/T
2. L/C (for container order only)
B. Technical service
1. We calculate the capacity and recommend the best models.
2. We supply you the professional refrigeration technical support
and electronic technical support for your installation, debugging
and operation.
3. We supply the spare parts and technical support in and after the
warranty time.
4. We supply the training course to your workers at our factory if
you need.
5. We can offer site training to your workers in your place which
is negotiable.
C. After-sales service
1. Technical support for your installation, operation and
maintenance.
2. Standard warranty time: One years’warranty for heat pumps
You can also pay for extended warranty or we can renegotiate the
longer warranty period.
- Spare parts and technical support at most economic prices after the
warranty.
FAQ
Q1. Can I have a sample order for Heat pump or Water tank?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: Sample needs 3-10days, mass production time depend on the
products' quantity.
Q3.Do you offer guarantee for the products?
A: Yes, 12 months since the heat pump depart from the port of
loading (Refer to the Bill of Lading).
Certificate we have got :
1> ISO 9001, ISO 14000
2> Our company has been inspected and certificate by EMC
3> CE And EN14511, EN 14825-ERP for heat pump exported to Europe
4> Energy label for all heat pump models sold to over sea market
5> Testing laboratory calibrated by CNAS
Meeting heat pump Main parts :
1:Copeland R410A /R417A/R407C compressor | 2:Aluminum finned copper coil heat exchanger |
3:High efficiency Stainless Steel plate heat exchanger (Swep/GEA is
option )
| 4:Saginomiya electronic expansion valves for throttling and EVI
,optimize performance |
5:Carel pressure transducers
| 6:Sanhua 4 way valve |
7:Built-in differential pressure flow switch
| 8:Meeting self-developed controller with remote control,
user-friendly interface ,easy to understand and operate. |
9:Good look and long lasting galvanized sheet or stainless steel
cabinet
| 10:R410A refrigerant is pre-filled inside indoor unit. |
MD30D Air source heat pump parameters tables
