meeting md70d Development and application of low temperature
environment friendly air source heat pump
Our company Jinlun Group have produce heat pump for 19 years, we
have great experience, we have strong R&D teams, we welcom OEM
and ODM.
Technology Specifications
| Heating capacity: 26KW | Rated water temperature: 55 ° C |
| Cooling capacity: 20.4KW | Rated cold water temperature: 7 ° C |
| Water production: 600L/H | Rated voltage: 380V/50HZ |
| Input power: 6.8KW | Working environment: (-25 ° C) - 45 ° C |
| Rated current: 13.6A | Water flow: 7000L/H |
| Noise Db: ≤ 55Db | Compressor: brand press |
| Interface size: 32ND | |
| Above parameters test conditions as follows: environment dry bulb
temperature 20 ℃, wet bulb temperature 15 ℃, into the cold water
temperature 15 ℃, the water temperature of 55 ℃ |
FEATUER
- with Advanced DC inverter technology, it saves 40% energy than
normal heat pump in practical operation.
- 5 modes to manage heating, cooling and DHW, fits your need all
year round.
- with temperature compensation function, the water setting
temperature adjusts automatically as the house's heat loss changes.
- Automatically variable fan speed in 3 grades to optimized heating
efficiency.
- Can work with room thermostat.
- Can work with auxiliary heater.
- Split design with water system indoor, preventing water frozen
problem.
- Aviation plug for wire connection between indoor unit and outdoor
unit, simplifies installation and avoids mistakes.
- with controller interface, plate heat exchanger, circulation
pump, flow switch, water pressure gauge in indoor unit.
- Allows absence of buffer tank.
A . Payment service
1 . T/T, 30% deposit, 70% balance before shipment.
B . Technical service
1 . We calculate the capacity and recommend the best models.
2 . We supply you the professional refrigeration technical support
and electronic technical support for your installation, debugging
and operation.
3 . We supply the spare parts and technical support in and after
the warranty time.
4 . We supply the training course to your workers at our factory or
site training if you need, welcome to be our partners.
C. After-sales service
1. Technical support for your installation, operation and
maintenance.
2. Standard warranty time : One years’warranty for heat pumps.
You can also pay for extended warranty or we can renegotiate the
longer warranty period.
Spare parts and technical support at most economic prices after the
warranty.
QC:
1. Complying with ISO standard. Quality Ensured.
2. Complete Inspection for each unit before out of factory,
covering water system and electricity detection and testing,
ensuring 100% right product before shipment.
3. Strict quality control during production. We have liquid soap
detection, halogen detection, electrical detection and
water-soaking detection during production to avoid gas leakage and
electrical problems .
4. Full inspection on bigger parts such as compressors, condensers,
evaporators, expansion valves, flow switches, controllers etc..
Selection inspection for small parts such as sensors, pressure
switches etc.
5. Well noise control by using mute cotton for casing plates and
soft rubber feet for floating compressors, some of the models use
compressor isolation shields.
6. Well insulated with insulated cotton for every pipe and parts,
include compressor, dryer filter and each pipes.
7. We have passed TUV and SGS inspections. We have CE, RoHs, IEC,
CCC, CB certificates for most of our products. Some of our products
have en14511 test, en14825 test.
FAQ
Q1. Can I have a sample order for Heat pump or Water tank?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: Sample needs 5-10days, mass production time depend on the
products'quantity.
Certificate we have got :
1> ISO 9001, ISO 14000
2> Our company has been inspected and certificate by EMC
3> CE And EN14511, EN 14825-ERP for heat pump exported to Europe
4> Energy label for all heat pump models sold to oversea market
5> Testing laboratory calibrated by CNAS |
